Immersion Type electromagnetic flowmeter
Immersion Type Electromagnetic Flowmeters are specific products that are used to measure flow by mounting on the line, by opening only the cross-section on the line where the flowmeter is mounted. The pipe measuring range that it can take measurements is in the range of 1" to 48". The pipe sizes that can be used according to their models are as follows:
EX80 1" to 8"
EX101 1"-1/2" ; It can be used between 3"-10" with connection equipment.
EX201 10"-48"
EX115 3" to 10"
EX21510" to 48"
Usable Pipe Size
1” to 48”
Body Material
316 SS / Brass / PVC
Sensor Material
Hastelloy
Connection Material
Bulk Powder Coated Aluminum
Sensor Cover
Teflon (PTFE)
O-Ring
EPDM; Optional Viton
Feed
12 - 25 Vdc, 250 mA
Flow Velocity Measurement Range
0.08 - 6.09 m/s
Temperature Range
Standard -17° to 72° C; Stainless Steel 0° to 93° C; PVC 0° to 55° C
Compressive Strength
13.8 bar Maximum; PVC 10 bar Maximum
Minimum Measurement Conductivity
20 microSiemens/cm
Sensibility
+/- 1% full scale
Exit
Square Wave Pulse Output, optional isolated 550 Hz Frequency Output
