(LONG) Immersion Type TURBINE FLOWMETER

Immersion type turbine flow meters have a wide usage area; They are semi-mechanical flow meters that can be utilised from 1/2" to 24". The sensors can be selected as brass, 316 stainless steel, PVC or polypropylene according to the usage area. The bodies are manufactured to in order to have the highest strength.
Additionally, It can be used for a long time thanks to the turbine and shaft materials made of high quality production nickel-bonded tungsten carbide. In order for the immersion turbine flowmeter to be used in accordance with its purpose; It is recommended to be used with fasteners that have been tested in a laboratory environment and whose K-Factor has been determined. Otherwise, the immersion length, tightness and K-Factor of the sensor must be determined in the most accurate way and mounted accordingly. The usage areas of these model flow meters are listed below:
➢ Industrial / Waste Water
➢ Cooling Water Monitoring
➢ Industrial flow control
➢ Chemical Ratio etc.

The short and long models of this flowmeter of Italian origin can be applied to pipes with a maximum size of 24". F3 (Short Version): 1/2" to 1 1/2" F3 (Long Model): 1/2" to 24"